Ljungby cab suspension system

Ljungby Maskin Comfort System is a hydraulic cab suspension system, which provides a significant reduction of vibration and shocks in the daily use of the machine.

At the launch at the Construction Live Fair in Sweden, there were many who test drove and gave feedback. At first, many were skeptical of the system, but after a test drive of the machine all doubt gone. "The system is just amazing," was the usual comment.

The cab is suspended on hydraulic cylinders, which are automatically regulated by the machine control system "Ljungby Maskin Control System". Hydraulics is relatively easy to control and adjust and that is one of the reasons why we developed a hydraulic system for damping. The system is designed so that the cab suspension does not affect the hydraulic capacity and therefore not machine productivity either. When the suspension is on, the cab is five centimeters higher in the working position. When the suspension is turned off, the cab drops down and then gets the same height as a standard machine.

The suspension is controlled fully automatic, but there is the possibility of manual settings such as gradients, damping and sensitivity, and of course, off and on. The system is activated automatically when the machine is started and the parking brake is released and turns off when the parking brake is applied or the system is switched off using the switch.

Ljungby Maskin Control System is tested and approved in ROPS / FOPS tests. The system is optional, not standard, and is available to our entire model range.